• Alloy: A1050, A1060, A1070, A1100, A3003, A3105 etc
• Aluminum thickness: 0.25mm up to 2.0mm
• Aluminum standard width: 600mm up to 1250mm
• Pattern: Rhombic veins, orange peel veins, diamond veins, five-rib veins etc.
• Appearance Clear Texture, Smooth edges no burrs.
• The most common alloys for stucco embossed Aluminium sheets are AA 1100 and AA 3003

Stucco aluminum coils/sheets are usually used in refrigerators, air conditioners and refrigeration equipment, and pipe insulation, the products have good thermal conductivity, heat dissipation due to the special nature of the pattern. Such materials are widely used in the fields of refrigerator, wine cabinet, solar panel, decorative aluminium product, lighting fixture, lighting box, sanitizer, kitchen cabinet and central air conditioning system. At present, in the refrigeration industry, the 3003 series of rust-proof aluminum coil are widely used; In pipe insulation and packaging 1000 series are widely used.

Stucco embossing is used for areas where aesthetics is desired and areas where reflection of sun needs to be eliminated.

• As aluminum is both a stable and durable material, it provides excellent service as a roofing or cladding without the need of any protective coating.
• The changes in appearance will be consistent along an elevation.
• Acid-corrosion-resistance, long-lasting shine, beautiful patterns, anti-corrosion performance and stability, strong adhesion, impact resistance, non-toxic side effects, safety and environmental protection.
• The electro-oxidation can effectively remove residual oil and manual handling of fingerprints.
• Embossed finish can enhance the thickness and strength of aluminum.
• aluminium sheet that has been stucco embossed is a lot more durable than one that is not. It's surface finish help hide scratches and other signs of wear.
• Stucco embossing also reduces the light-reflecting ability of the metal.
• This is due to the Pebble-like surface which is achieved once it has been given a proper finish.
• Stucco embossed aluminium sheet always looks more presentable.
• Stucco embossed aluminium sheets are made of different alloys. They need to have a required amount of flexibility and toughness to be graded accordingly.

Aluminum Jacketing is a protective outer surface on mechanical insulation systems such as pipe, vessel and equipment used in industrial and commercial applications. Aluminum Jacketing (Also referred as Cladding) are chosen as metal jacketing for their easier forming and better resistance to corrosion areas. It protects the insulation and underlying pipe/vessel from physical damage, UV exposure, corrosive atmospheres, and water.

• Grades- AA1060, AA3003, AA3105, AA5052, AA5005, AA6061
• Thickness from 0.30 – 2.00 mm
• Widths – 914/1000/1220 mm
• Available in Coils Sheets and Rolls of 100 Feet
• Moisture barrier Options – POLYSURLYN, POLYCRAFT
• External Coat Options – Polyester (PE), Acrylic, PVDF, Anti Sweat Coating etc.

There are two types of moisture barriers used on metal jacketing in mechanical insulation systems; Polysurlyn and Polykraft that we provide.

Arabian Iron and Steel (AISL) is the leading manufacturer & supplier of polysurlyn moisture barriers in the UAE offering customized products at reasonable rates. Polysurlyn moisture barrier (PSMB) is a thick three layer film that is applied by laminating the film to the aluminium sheet by a process of heat and

PSMB typically consists of three layers: a layer of polyethylene, a layer of aluminum foil, and a layer of polysurlyn (a co-extruded film of polyethylene and aluminum). The aluminum foil layer serves as the vapor barrier, while the polyethylene layer and polysurlyn layer provide additional durability and protect the aluminum from punctures or tears. Polysurlyn moisture barrier or PSMB sheets are a film lamination with a thickness of 76 µm. This is done to prevent galvanic corrosion and rusting of the metal jacketing. Mainly, they are used both in hot and cold applications. The barrier plays a significant role in separating the jacket from the insulating layers and offers protection to the underside of the metal jacketing from getting in contact with moisture, thus preventing rust and corrosion.

Polysurlyn Moisture Retarder provides an excellent resistance to moisture and has excellent abrasion resistance during installation. Polysurlyn is a high performance solution as it has no pinholes, is a multilayer film, has a very low water vapour transmission rate and a very low water absorption. Additionally, it is tough, scratch resistant and durable.

Our polysurlyn moisture barrier aluminium coil can be cut to length as desired by the clients. Our supplied products are used on metal jacketing and are mainly used for applications requiring mechanical insulation like – hot and cold pipes, equipment, commercial sectors, cement, power plants, industrial, petrochemical, gas and oil applications.

Polykraft is a layer of kraft paper laminated to a single thin layer of polyethylene film. Polykraft consists of one layer polyethylene film with a protective layer of kraft paper. The moisture barrier is factory applied by attaching the jacketing by continuous lamination to the full width of the metal. Aluminium Jacketing equipped with Poly Kraft (Moisture Barrier) with anti corrosion and anti-galvanic properties.

We are one of the top Polysurlyn and Polykraft manufacturers and suppliers in the UAE market, with a strong presence in the international domain as well. All our moisture barrier coils are custom-made as per the client’s requirements. Our moisture barriers can prevent galvanic corrosions from underneath. The polysurlyn is known for its properties of strength in resisting moisture, and, if 2 additional layers of polyethene are combined, then it prevents the pinholes’ alignment in each layer, thus exhibiting zero pinholes. The best rates, on-time deliveries, and customer support services have made us one of the trusted brands of polysurlyn moisture barriers in the UAE market.

Doorstep delivery is available all over the UAE, Oman (Salalah, Muscat, Ibri, Sohar, Nizwa, and Barka), Saudi Arabia, Kuwait, Bahrain, Qatar, Jordan, Yemen, and Sri Lanka. Each of the Polysurlyn and Polykraft moisture barrier aluminium coils is packed and inspected thoroughly by our experts before they are shipped from our facility. You can expect excellent product quality and assurance from us.

• PSMB can be used as a protective layer for metal structures such as pipelines, tanks, and storage vessels. The aluminum foil layer can help to protect the metal from corrosion and damage.
• PSMB can be used as a lining for heating, ventilation, and air conditioning systems to prevent moisture from penetrating the ductwork.
• PSMB is applied to the inner surface of metal building panels to provide insulation and prevent moisture penetration. This can help to increase the energy efficiency of the building and prevent damage to the insulation or growth of mold.
• PSMB can be used to insulate roofs and walls in both residential and commercial buildings. This can help to prevent heat loss and increase energy efficiency.
• PSMB can be used as an insulation wrap for pipes, particularly those that carry hot fluids. This can help to prevent heat loss and improve the energy efficiency of the building.

PSMB is a good option because of its durability, resistance to moisture, and low cost, but it’s not the only one and another similar moisture barrier can be used as well like polyethylene moisture barrier and Polykraft Moisture Barrier.